Single-phase voltage stabilizer AMPERE U 9-1/63 v2.0
Single-phase voltage stabilizer "Ampere 9" is designed to operate in electrical networks with voltage fluctuations from 160 to 260V. In this range, the device is guaranteed to deliver a voltage at the output within 220 ± 4.5%, which is ensured through the use of 9 stabilization steps. The lineup of all listed Amperes in terms of power can be 2.2, 3.5, 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 10, 16, 25, 32, 40, 50, 63 and 80A, respectively. The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass). It is recommended to install and operate the Ampere stabilizer in dry and heated rooms. It is recommended to mount the wall in a vertical position (fans upwards), leaving 10-15cm at the top and bottom for cooling. The connection is made to the existing wiring through the terminal block.
| Operating current, A | 63 |
| Rated power, kVA / kW | 14.0 |
| Number of stabilization steps | 9 |
| Key type | thyristor |
| The efficiency of the stabilizer is not lower,% | 98 |
| Active power consumption at idle, no more, W | 35 |
| Nominal output voltage, V | 220 |
| Minimum operating input voltage, V | 135 |
| Minimum operating input voltage in bypass mode, V | 120 |
| Maximum operating input voltage in bypass mode, V | 265 |
| Maximum input operating voltage, V | 285 |
| Stabilization accuracy,% | 4.5 |
| Response time to changes in input voltage, ms | 20 |
| Power supply frequency, Hz | 45-65 |
| Input Current and Apparent Power Measurement | yes |
| Short-circuit and overload current limitation | input circuit breaker with B-characteristic electromagnetic protection |
| Electronic Bypass | yes |
| Network and Stabilizer Condition Analyzer | yes |
| Duplicate overvoltage protection | yes |
| Microcontroller control | yes |
| Input choke | yes |
| Output choke | no |
| Overheating protection | yes |
| Minimum cable cross-section for connection, mm² | 10 |
| Maximum cross-section of cable conductors for connection, mm² | 40 |
| Forced Cooling | two speed fan |
| Overall dimensions, mm, no more | 530х295х175 |
| Weight, kg, no more | 26 |
| Warranty, years | 7 |
